Radio Controlled Switch

This minute RC switch can be used to switch lights etc up to at least 1Amp and 20Volt supply. It can also be set to switch devices using the 4.8v RC battery supply (up to 1A). Wire jumpers select normal or reverse mode and continuous/ intermittent (0.5 sec on, 0.5 sec off) operation. Supplied without leads but with heatshrink sleeve cover.


1A, 20V MOSFET switch.
Normal/ reverse operation.
Intermittent/ continuous output.
Works with standard Rx 1-2ms signal.
Connection options
RC Switch

Available without leads:
RC switch


post + packing